07. Steam loss from the power connector on the body of the machine

If you detect steam loss from the power connector (12 Volt) on the body of the machine.

First check that power connector is properly connected to the machine.

1) If steam leakage continues, turn off the machine and release all pressure in the machine.

2) Unplug the appliance from the power supply and disconnect the power connector from the body of the machine

 

 

3) Unscrew the three screws on the power connector

4) Separate the plug casing in two parts

5) Remove the spare O-rings on the back of the machine

6) Apply the O-rings to the nozzle

7) Place the electric component inside the upper part of casing, with the pin properly oriented

8) Repeat the same process for the nozzle

9) Reconnect the two halves of the casing, making sure that all elements remain correctly in place

10) Screw the two halves of the casing together with the three screws

 

News & Events

No news currently available